Welded-steel-type Drag Chains
Product Description
Technical Data Sheet
曳引用焊接结构弯板链
Welded-steel-type drag chains
ISO链号ISO Chain No. | 节距Pitch P mm | 套筒A-A截面长度Bush A-A section length L1 mm | 套筒A-A截面高度Bush A-A section height L2 mm | 链节窄端内宽 Width between narrow linkend b1 min mm | 销轴直径 Pin diameter end d1 max mm | 链节窄端外宽 Width over narrow linkend b2 max mm | 链节宽端内宽 Width between broad linkend b3 min mm | 链板高度 Plate depth h2 max mm |
WD102 | 127.0 | 31.7 | 39.1 | 162.0 | 19.13 | 197.1 | 197.6 | 38.12 |
WD104 | 152.4 | 31.7 | 39.1 | 104.6 | 19.13 | 136.9 | 137.4 | 38.12 |
WD110 | 152.4 | 31.7 | 39.1 | 228.6 | 19.13 | 263.9 | 264.4 | 38.12 |
WD112 | 203.2 | 31.7 | 39.1 | 228.6 | 19.13 | 263.9 | 264.4 | 38.12 |
WD113 | 152.4 | 33.2 | 39.1 | 228.6 | 22.30 | 270.2 | 270.7 | 38.12 |
WD116 | 203.2 | 36.6 | 45.2 | 330.2 | 19.13 | 359.1 | 359.6 | 45.21 |
WD118 | 203.2 | 44.5 | 51.8 | 336.5 | 22.30 | 378.2 | 378.7 | 51.80 |
WD122 | 203.2 | 44.5 | 51.8 | 222.2 | 22.30 | 260.6 | 261.1 | 51.80 |
WD480 | 203.2 | 44.5 | 51.8 | 282.4 | 22.30 | 324.1 | 324.6 | 51.80 |
ISO链号ISO Chain No. | 销轴长度Pin length | 链板厚度Plate thickness T mm | 抗拉强度Tensile strength | ||
L max mm | Lc max mm | Q min kN/lbf | Q min kN/lbf | ||
销轴热处理Only pin hardened | 全部热处理All parts hardened | ||||
WD102 | 255.6 | 245.4 | 9.7 | 170/38217.0 | 245/55078.20 |
WD104 | 188.0 | 181.4 | 9.7 | 170/38217.0 | 245/55078.20 |
WD110 | 315.0 | 308.6 | 9.7 | 170/38217.0 | 245/55078.20 |
WD112 | 315.0 | 308.6 | 9.7 | 170/38217.0 | 245/55078.20 |
WD113 | 330.2 | 322.3 | 12.7 | 213/47884.3 | 253/56876.68 |
WD116 | 410.4 | 405.9 | 9.7 | 245/55078.2 | 262/58899.90 |
WD118 | 440.0 | 431.1 | 12.7 | 311/69915.6 | 351/78907.96 |
WD122 | 324.2 | 314.5 | 12.7 | 311/69915.6 | 351/78907.96 |
WD480 | 387.6 | 378.0 | 12.7 | 311/69915.6 | 351/78907.96 |