Article List
- Gear shapingGear shapingUse gear shaper to process tooth surface of internal and external gear or rack according to generating method or forming method.Like gear hobbing, gear shaping is also processed by generating method. Gear shaper is like a gear with front and back angles to form cutting edge, so the princ
- AlveolusAlveolusCogging is the concave part between the teeth of a gear.The space between two adjacent teeth on a gear is called a cog or a cog. The size of the tooth slot is represented by the slot width, which can be divided into two types: the end slot width and the normal slot width.(1) End slot width (
- Basin angle tooth production and processingBasin angle tooth production and processingGear blank processingThe rough machining of gears plays an important role in the whole gear processing. The reference used for the machining and testing of the tooth surface must be processed in the machining stage of the gear blank. At the same time, the m
- WP series reducerWP series reducer, worm is made of 45 × high-quality steel through heat treatment, and worm wheel is cast with tin bronze. It has good wear-resistant performance, especially in bearing capacity. It is mainly suitable for deceleration transmission of various mechanical equipment such as plastic, meta
- General reducersGeneral reducers include helical gear reducers (including parallel shaft helical gear reducers, worm gear reducers, bevel gear reducers, etc.), planetary gear reducers, cycloidal pin gear reducers, worm gear reducers, planetary friction type mechanical stepless transmission, etc.1) cylindrical gear
- Magnetic powder clutchMagnetic powder clutch is based on electromagnetic principle and uses magnetic powder to transfer torque. It has a linear relationship between excitation current and transfer torque. It can transfer a certain torque when it has nothing to do with slip. It has the advantages of fast response, simple
- Conveyor turning deviceThe conveyor turning device is a horizontal direction changing device that guides the chain and slide frame to turn smoothly along the track. It is installed on the horizontal turning track section of the line. The disc in the center of the elbow can rotate 360 degrees of the central axis, which is
- Track mounting hangerKnowledge Sharing: Conveyor AccessoriesTrack mounting hangerFeatures: When installing, the track is stuck in the hanger and locked with screws. The positioning and reliability of the installation can be greatly increased, and the disassembly and assembly is convenient.Track connecting pieceFeatures
- Alloy structural steelDue to the suitable hardenability of the alloy structural steel, after the appropriate metal heat treatment, the microstructure is uniform soxite, bainite or very fine pearlite, thus having high tensile strength and yield ratio. (generally around 0.85), high toughness and fatigue strength, and low t
- THE ROLE OF TUNGSTEN IN STEELTHE ROLE OF TUNGSTEN IN STEELTungsten has high melting point and high specific gravity. Tungsten carbide formed from tungsten and carbon has high hardness and wear resistance. When tungsten is added to tool steel, the red hardness and thermal strength can be significantly improved, and it can be use