Article List
- Track mounting hangerKnowledge Sharing: Conveyor AccessoriesTrack mounting hangerFeatures: When installing, the track is stuck in the hanger and locked with screws. The positioning and reliability of the installation can be greatly increased, and the disassembly and assembly is convenient.Track connecting pieceFeatures
- Alloy structural steelDue to the suitable hardenability of the alloy structural steel, after the appropriate metal heat treatment, the microstructure is uniform soxite, bainite or very fine pearlite, thus having high tensile strength and yield ratio. (generally around 0.85), high toughness and fatigue strength, and low t
- THE ROLE OF TUNGSTEN IN STEELTHE ROLE OF TUNGSTEN IN STEELTungsten has high melting point and high specific gravity. Tungsten carbide formed from tungsten and carbon has high hardness and wear resistance. When tungsten is added to tool steel, the red hardness and thermal strength can be significantly improved, and it can be use
- The role of car beltThe role of car beltThe function of the car belt is to support the upper and lower, the upper connection is the timing wheel of the engine cylinder head, the lower connection is the crankshaft timing wheel; the timing wheel is connected to the camshaft, and the camshaft has a cam, and its contact po
- Common nitridingCommon nitridingIt mainly refers to liquid nitriding. The most commonly used method is heating nitriding in salt bath, which is suitable for small batch production. There are many kinds of vacuum nitriding. Gas and ion nitriding belong to vacuum nitriding, which should be carried out after vacuum ev
- How to Calculate the Tooth Number of Synchronization BeltHow to Calculate the Tooth Number of Synchronization BeltDividing length by 2.5 is the number of teeth, such as T2, 5-105-3mm, and dividing length by 2.5 is 42 teeth
- Chemical deburringChemical deburringChemical deburring is a process using chemical energy. Chemical ions will adhere to the surface of parts, forming a film with high resistance and low conductivity to protect the workpiece from corrosion. Because the burr is above the surface, it can be removed by chemical action. T
- Air quenchingAir quenching: The cooling process of quenching is air quenching.Many steels with low critical cooling rate, such as those with high nickel content, can be air-cooled. Its characteristics are: the internal stress is significantly lower than that of conventional quenching, and there is no special req
- What are the main functions of rubber mats of elastic couplings?What are the main functions of rubber mats of elastic couplings?The deviation acting on the installation dimension, that is to say, the center-finding of the coupling, can not compensate for the deviation of left-right or up-down by 100% of the accuracy of the connection between the motor and the co
- Material heat treatment waysMaterial heat treatment waysWe are transmission spare parts supplier such as chain, sprocket, gear, gear rack, pulley, coupling and so on. Now we introduce material heat treatment ways as below:1) Heat treatmentA process for heating, holding, and cooling a metal material or workpiece (hereinafter reIndustry information April 29, 2019