Views: 0 Author: Site Editor Publish Time: 2024-10-29 Origin: Site
It is composed of a porous partition and a container, with the porous partition dividing the container into upper and lower parts.
Working process: Compressed air is introduced into the container below the partition, and the compressed air passes through the porous partition to suspend the powder above without being affected by air flow, and rolls over in the upper container, presenting a "boiling" state. The preheated workpiece achieves coating effect through the "boiling" powder zone (manufacturer of various spraying production lines and exhaust gas treatment equipment: Fan 13141458653). The preheating temperature of the workpiece can be slightly higher than the melting temperature of the powder.
In recent years, fluidized bed technology has been improved and combined with electrostatic powder to form electrostatic fluidized bed powder spraying, which has been widely used.
To achieve better coating results, attention should be paid to the following aspects:
1) The structural form of fluidized bed requires simplicity, smooth interior to avoid dead corners, and it is best to have vibration devices.
2) The porous partition in a fluidized bed should have a certain pore size and air density distribution.
3) The size of the powder particles should pass through a 50-150 mesh/mesh sieve, and a shape close to spherical is ideal.
4) The moisture content of powder coatings should be kept as low as possible to avoid poor fluidization and coating bubbles.
5) The flow rate and flow rate of compressed air must be adjusted to ensure stable fluidization of the powder coating without overflow, and the compressed air should be purified and dried.