-
AlveolusCogging is the concave part between the teeth of a gear.The space between two adjacent teeth on a gear is called a cog or a cog. The size of the tooth slot is represented by the slot width, which can be divided into two types: the end slot width and the normal slot width.(1) End slot width (
-
Worm gear mechanism is often used to transmit the motion and power between two staggered axes. Worm gear and worm are equal to gear and rack in their middle plane, and worm is similar to screw.Basic parametersModulus m, pressure angle, worm diameter coefficient Q, lead angle, worm head number, worm
-
Use of pressure angleWhether in plane transmission or in gear transmission, the pressure angle can be used as a standard to judge the transmission performance of the transmission mechanism. The smaller the pressure angle is, the greater the component force of the force along the speed direction is,
-
Hydraulic clutchCompared with mechanical clutch, hydraulic clutch uses fluid (generally oil) as transmission medium. In addition to various changes in transmission characteristics, it mainly absorbs the vibration and impact caused by the rotation of driving shaft and driven shaft.The structure of th